REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE MANUAL TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE CLUTCH COVER ASSEMBLY

    Click here

  3. REMOVE CLUTCH DISC ASSEMBLY

    Click here

  4. REMOVE FLYWHEEL WITH DAMPER ASSEMBLY


    1. A01LZDME01

      Using SST, secure the flywheel with damper assembly.

      SST
      PZ4TB-04939-38
    2. A01LYEUE01

      Using SST, remove the 8 bolts and flywheel with damper assembly.

      SST
      PZ4TB-04910-18

    3. Remove SST.

    4. A01M1WN

      Remove the crankshaft position sensor plate from the crankshaft.

  5. REMOVE REAR ENGINE OIL SEAL


    1. A01LXWQC01
      *a Protective Tape

      Using a screwdriver, pry out the rear engine oil seal.

      Note

      Do not damage the rear engine oil seal press fit hole, crankshaft or the surface of the timing chain cover plate.

      Tech Tips

      Tape the screwdriver tip before use.