MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL DIESEL TURBO PRESSURE SENSOR


    1. A01CW72C02
      *1 Protrusion

      Install the diesel turbo pressure sensor with the bolt.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

      Note

      Make sure the protrusion of the gas filter bracket is inserted into the hole of the diesel turbo pressure sensor.

    2. Connect the diesel turbo pressure sensor connector.

    3. Connect the vacuum hose.

  2. INSTALL NO. 1 ENGINE COVER

    Click here