ACCELERATOR PEDAL INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

   Note

   
   

   • This accelerator pedal sensor assembly does not require lubrication.

     Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

     If applied, the accelerator pedal sensor assembly must be replaced.

   • Avoid physical shocks to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   
   

   1. Install the accelerator pedal sensor assembly with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the accelerator pedal sensor assembly connector.