2AD-FTV BATTERY / CHARGING TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame assembly
2.3 N*m
23 kgf*cm
20 in.*lbf
Generator coil assembly x Generator drive end frame assembly
5.9 N*m
60 kgf*cm
52 in.*lbf
Generator brush holder assembly x Generator coil assembly
1.8 N*m
18 kgf*cm
16 in.*lbf
Generator rear end cover x Generator coil assembly
4.6 N*m
47 kgf*cm
41 in.*lbf
Generator with clutch pulley x Generator coil assembly with SST
88 N*m
897 kgf*cm
65 ft.*lbf
without SST
110.5 N*m
1127 kgf*cm
81 ft.*lbf
Generator assembly x Cylinder block
25 N*m
255 kgf*cm
18 ft.*lbf
Wire harness x Terminal B
9.8 N*m
100 kgf*cm
87 in.*lbf
Wire harness x Generator assembly
7.7 N*m
79 kgf*cm
68 in.*lbf

Wire harness clamp bracket x Generator assembly

(for DPF)
12.5 N*m
127 kgf*cm
9 ft.*lbf
Negative (-) battery terminal x Battery
5.4 N*m
55 kgf*cm
48 in.*lbf
Battery current sensor assembly x Negative (-) battery terminal
7.6 N*m
77 kgf*cm
67 in.*lbf
No. 3 engine wire x Battery current sensor assembly
7.6 N*m
77 kgf*cm
67 in.*lbf