| Standard drive shaft length | for 1AD-FTV (Manual Transaxle) | LH Side | 553.6 mm (1.82 ft.) |
| RH Side | 932.4 mm (3.06 ft.) | ||
| for 2AR-FE (Automatic Transaxle) | LH Side | 577.6 mm (1.89 ft.) | |
| RH Side | 914.4 mm (3.00 ft.) | ||
| for 2AR-FE (Manual Transaxle) | LH Side | 583.6 mm (1.91 ft.) | |
| RH Side | 906.4 mm (2.97 ft.) | ||
| for 3ZR-FE (Manual Transaxle) | LH Side | 594.6 mm (1.95 ft.) | |
| RH Side | 893.4 mm (2.93 ft.) | ||
| for 3ZR-FE (CVT) | LH Side | 591.2 mm (1.94 ft.) | |
| RH Side | 890.0 mm (2.92 ft.) | ||
| Front drive shaft dust cover | Standard distance | w/o Drive Shaft Bearing Case | 41.6 to 42.6 mm (1.638 to 1.677 in.) |
| w/ Drive Shaft Bearing Case | |||
| Front drive shaft dust cover RH | Standard distance | for 1AD-FTV (Manual Transaxle) | 110.0 to 111.0 mm (4.331 to 4.370 in.) |
| for 2AR-FE (Automatic Transaxle) | |||
| for 2AR-FE (Manual Transaxle) | 91.0 to 92.0 mm (3.583 to 3.622 in.) | ||
| for 3ZR-FE (Manual Transaxle) | |||
| for 3ZR-FE (CVT) | |||
| Front drive shaft damper LH (w/ Drive Shaft Damper) |
Standard distance | for 3ZR-FE | 199.0 to 203.0 mm (7.835 to 7.992 in.) |
| except 3ZR-FE | 212.5 to 216.5 mm (8.367 to 8.523 in.) | ||
| Front drive shaft damper RH (w/ Drive Shaft Damper) |
Standard distance | - | 199.0 to 203.0 mm (7.835 to 7.992 in.) |
| Standard grease capacity | Outboard joint | for 1AD-FTV (Manual Transaxle) | 205 to 215 g (7.3 to 7.5 oz) |
| for 1AD-FTV (Manual Transaxle) | |||
| for 2AR-FE (Manual Transaxle) | |||
| for 3ZR-FE (Manual Transaxle) | |||
| for 3ZR-FE (CVT) | 171 to 181 g (6.1 to 6.3 oz) | ||
| Inboard joint | - | 175 to 185 g (6.2 to 6.5 oz) |
| Standard drive shaft length | for 2AD-FTV, 2AD-FHV (Automatic Transaxle) | LH Side | 565.6 mm (1.86 ft.) |
| RH Side | 928.4 mm (3.05 ft.) | ||
| for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) | LH Side | 553.6 mm (1.82 ft.) | |
| RH Side | 933.9 mm (3.06 ft.) | ||
| for 2AR-FE (Automatic Transaxle) | LH Side | 577.6 mm (1.89 ft.) | |
| RH Side | 922.4 mm (3.03 ft.) | ||
| for 2AR-FE (Manual Transaxle) | LH Side | 583.6 mm (1.91 ft.) | |
| RH Side | 909.4 mm (2.98 ft.) | ||
| for 3ZR-FE, 3ZR-FAE (Manual Transaxle) | LH Side | 594.6 mm (1.95 ft.) | |
| RH Side | 896.4 mm (2.94 ft.) | ||
| for 3ZR-FE (CVT) | LH Side | 591.2 mm (1.94 ft.) | |
| RH Side | 881.9 mm (2.89 ft.) | ||
| for 3ZR-FAE (CVT) | LH Side | 591.2 mm (1.94 ft.) | |
| RH Side | 893.0 mm (2.93 ft.) | ||
| Front drive shaft dust cover RH | Standard distance | - | 103.5 to 104.5 mm (4.075 to 4.114 in.) |
| Front drive shaft damper LH (w/ Drive Shaft Damper) |
Standard distance | for 3ZR-FE, 3ZR-FAE | 199.0 to 203.0 mm (7.835 to 7.992 in.) |
| except 3ZR-FE, 3ZR-FAE | 212.5 to 216.5 mm (8.367 to 8.523 in.) | ||
| Front drive shaft damper RH | Standard distance | - | 199.0 to 203.0 mm (7.835 to 7.992 in.) |
| Standard grease capacity | Outboard joint | for 2AD-FTV, 2AD-FHV (Automatic Transaxle) | 205 to 215 g (7.3 to 7.5 oz) |
| for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) | |||
| for 2AR-FE (Automatic Transaxle) | |||
| for 2AR-FE (Manual Transaxle) | |||
| for 3ZR-FE, 3ZR-FAE (Manual Transaxle) | |||
| for 3ZR-FE, 3ZR-FAE (CVT) | 171 to 181 g (6.1 to 6.3 oz) | ||
| Inboard joint | - | 175 to 185 g (6.2 to 6.5 oz) |
| Standard drive shaft length | LH Side | 733.2 mm (2.40 ft.) |
| RH Side | ||
| Standard drive shaft boot clamp clearance | Rear drive shaft outboard joint boot clamp LH | 1.2 mm (0.0472 in.) or less |
| Rear No. 2 drive shaft outboard joint boot clamp LH | - | |
| Rear drive shaft inboard joint boot clamp LH | ||
| Rear No. 2 drive shaft inboard joint boot clamp LH | ||
| Standard grease capacity | Outboard joint | 55 to 65 g (2.0 to 2.2 oz) |
| Inboard joint | 77 to 87 g (2.8 to 3.0 oz) |
| Propeller shaft runout | Front Side | 0.4 mm (0.0157 in.) |
| Rear Side | ||
| No. 1 Joint Angle | for 2AD-FTV, 2AD-FHV (Automatic Transaxle) | -2°31' +/- 60' |
| for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) | -2°27' +/- 60' | |
| for 2AR-FE (Automatic Transaxle) | -2°29' +/- 60' | |
| for 2AR-FE (Manual Transaxle) | -2°29' +/- 60' | |
| for 3ZR-FE, 3ZR-FAE (Manual Transaxle) | -2°13' +/- 60' | |
| for 3ZR-FE, 3ZR-FAE (CVT) | -2°28' +/- 60' | |
| No. 2 Joint Angle | for 2AD-FTV, 2AD-FHV (Automatic Transaxle) | 2°05' +/- 1°30' |
| for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) | 1°35' +/- 1°30' | |
| for 2AR-FE (Automatic Transaxle) | 2°04' +/- 1°30' | |
| for 2AR-FE (Manual Transaxle) | 2°04' +/- 1°30' | |
| for 3ZR-FE, 3ZR-FAE (Manual Transaxle) | 1°02' +/- 1°30' | |
| for 3ZR-FE, 3ZR-FAE (CVT) | 1°35' +/- 1°30' | |
| No. 3 Joint Angle | for 2AD-FTV, 2AD-FHV (Automatic Transaxle) | 2°01' +/- 60' |
| for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) | 2° 04'+/- 60' | |
| for 2AR-FE (Automatic Transaxle) | 2°01' +/- 60' | |
| for 2AR-FE (Manual Transaxle) | 2°01' +/- 60' | |
| for 3ZR-FE, 3ZR-FAE (Manual Transaxle) | 2°23' +/- 60' | |
| for 3ZR-FE, 3ZR-FAE (CVT) | 2° 04'+/- 60' | |
| Center support bearing washer | Thickness | 2.0 mm (0.0787 in.) |
| 4.5 mm (0.1772 in.) | ||
| 6.5 mm (0.2559 in.) |