2AR-FE STARTING SERVICE DATA

STARTER ASSEMBLY
Tester Connection Condition Specified Condition
Battery positive terminal - Terminal 30 11.5 V 90 A or less
MAGNET STARTER SWITCH ASSEMBLY
Tester Connection Condition Specified Condition
Terminal 50 - Terminal C Always Below 1 Ω
Terminal 50 - Switch body Always Below 2 Ω
STARTER ARMATURE ASSEMBLY (Standard Resistance)
Tester Connection Condition Specified Condition
Segment - Segment Always Below 1 Ω
Segment - Coil core Always 10 kΩ or higher
STARTER ARMATURE ASSEMBLY (Commutator length)
Standard length 3.1 mm (0.122 in.)
Maximum length 3.8 mm (0.150 in.)
STARTER COMMUTATOR END FRAME ASSEMBLY (Standard Resistance)
Tester Connection Condition Specified Condition
Positive (+) brush - Negative (-) brush Always 10 kΩ or higher
STARTER COMMUTATOR END FRAME ASSEMBLY (Brush length)
Standard Length 9.0 mm (0.354 in.)
Minimum Length 4.0 mm (0.157 in.)
STARTER RELAY
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω