2AD-FHV LUBRICATION SERVICE DATA

ENGINE OIL PRESSURE
Condition Specified Condition
Idle

29 kPa (0.3 kgf/cm2, 4.2 psi) or higher
4500 rpm

245 kPa (2.5 kgf/cm2, 36 psi) or higher
STANDARD OIL GRADE
Oil Grade Oil Viscosity (SAE)
ACEA C2

- 0W-30

- 5W-30
STANDARD CAPACITY
Item Specified Condition
Drain and refill without oil filter change 5.5 liters (5.8 US qts, 4.8 Imp.qts)
Drain and refill with oil filter change 5.9 liters (6.2 US qts, 5.2 Imp.qts)
Dry fill 6.3 liters (6.7 US qts, 5.5 Imp.qts)
OIL PRESSURE SWITCH
Tester Connection Condition Specified Condition
1 - Body ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher
OIL LEVEL SENSOR
Tester Connection Switch Condition Specified Condition
1 - 2 On Below 0.5 Ω
Off 1 MΩ or higher
OIL PUMP
Driven rotor and Drive rotor Standard tip clearance 0.180 to 0.300 mm (0.00709 to 0.0118 in.)
Maximum tip clearance 0.300 mm (0.0118 in.)
Standard body clearance 0.175 to 0.250 mm (0.00689 to 0.00984 in.)
Maximum body clearance 0.250 mm (0.00984 in.)
Standard side clearance 0.030 to 0.090 mm (0.00118 to 0.00354 in.)
Maximum side clearance 0.090 mm (0.00354 in.)