ECM INSTALLATION

PROCEDURE

1. INSTALL ECM

   
   

   1. Install the No. 1 ECM bracket and No. 2 ECM bracket to the ECM with the 4 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

   2. Install the ECM with bracket with the 3 bolts.

      Torque:

      6.5 N*m  { 66 kgf*cm, 58 in.*lbf }

   3. Connect the 2 ECM connectors and lower the 2 levers.

      Note

      
      

      • When connecting the ECM connector, make sure that dirt, water or other foreign matter is not stuck between the ECM connector and ECM.

      • Make sure that the 2 levers are securely lowered.

2. INSTALL AIR CLEANER CASE

   Click here

3. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

5. INSTALL NO. 1 ENGINE COVER

   Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

7. PERFORM REGISTRATION

   Click here

8. PERFORM INITIALIZATION

   Click here

9. PERFORM THROTTLE VALVE FULLY CLOSED POSITION LEARNING

   Click here