CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR

   
   

   1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note

      
      

      • When reusing the camshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.

   2. Install the camshaft position sensor with the bolt.

      Torque:

      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

   3. Connect the camshaft position sensor connector.

   4. Attach the wire harness clamp.