КОРПУС ДИФФЕРЕНЦИАЛА ПОВТОРНАЯ СБОРКА

PROCEDURE


  1. INSTALL FRONT DIFFERENTIAL RING GEAR


    1. A012J19C01
      *a 90 to 100°C (194 to 212°F)

      Using a heater, heat the front differential ring gear to 90 to 100°C (194 to 212°F).

    2. Clean the contact surface of the front No. 1 differential case sub-assembly.

    3. A012H5EC01
      *a Matchmark

      Aligning the matchmarks, quickly install the front differential ring gear to the front No. 1 differential case sub-assembly with the 16 bolts.

      Torque:
      106 N*m  { 1081 kgf*cm, 78 ft.*lbf }

  2. INSTALL FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    1. A012LLDN01

      Using SST and a press, install a new front differential case front tapered roller bearing to the front No. 1 differential case sub-assembly.

      SST
      09309-14010

  3. INSTALL FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    1. A012JATN01

      Using SST and a press, install a new front differential case rear tapered roller bearing to the front No. 1 differential case sub-assembly.

      SST
      09554-22010