ТРОС МЕХАНИЗМА ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ СНЯТИЕ

PROCEDURE


  1. REMOVE BATTERY

    Click here

  2. REMOVE BATTERY TRAY

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  7. REMOVE NO. 1 FRONT FLOOR HEAT INSULATOR


    1. A012HZX

      Remove the 3 nuts and No. 1 front floor heat insulator from the body.

  8. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  9. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A012N0L

      Remove the clip and disconnect the transmission control select cable from the floor shift lever assembly.

    2. A012F90

      Disconnect the transmission control shift cable from the floor shift lever assembly.

    3. A012G0U

      Disengage the 2 claws and separate the transmission control cable assembly from the floor shift lever assembly.

    4. A012H63

      Remove the 2 clips and disconnect the transmission control cable assembly from the manual transaxle assembly.

    5. A012LJ1

      Remove the 2 clips and disconnect the transmission control cable assembly from the control cable bracket.

    6. A012LBB

      Remove the bolt and disconnect the transmission control cable assembly from the rear engine mounting bracket.

    7. A012G4E

      Remove the 2 nuts and transmission control cable assembly from the vehicle exterior.