МАСЛО ДЛЯ МЕХАНИЧЕСКИХ ТРАНСМИССИЙ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. INSPECT MANUAL TRANSAXLE OIL


    1. A01TBMU

      Remove the manual transmission filler plug and gasket.

    2. A01TBJWC02
      *a 0 to 5 mm (0 to 0.197 in.)

      Check that the oil surface is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the manual transmission filler plug opening.

      Note

      An excessively large or small amount of manual transaxle oil may cause problems.

    3. Check for oil leakage when the oil level is low.

    4. A01TBMU

      Install a new gasket and the manual transmission filler plug.

      Torque:
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }

  3. INSTALL NO. 1 ENGINE UNDER COVER

    Click here