МЕХАНИЧЕСКАЯ ТРАНСМИССИЯ В СБОРЕ УЗЛЫ И ДЕТАЛИ
ILLUSTRATION
| *A | Type A | *B | Type B |
| *1 | ENGINE ASSEMBLY WITH TRANSAXLE | *2 | FRONT ENGINE MOUNTING INSULATOR |
| *3 | NO. 1 AIR TUBE | *4 | REAR ENGINE MOUNTING INSULATOR |
| *5 | SPEEDOMETER DRIVEN HOLE COVER SUB-ASSEMBLY | *6 | WIRE HARNESS |
| *7 | O-RING | *8 | OUTLET HEATER WATER HOSE A |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Gear oil | - | - |
ILLUSTRATION
| *A | Type A | *B | Type B |
| *1 | CLUTCH ACCUMULATOR ASSEMBLY | *2 | CLUTCH RELEASE BLEEDER SUB-ASSEMBLY |
| *3 | CLUTCH RELEASE CYLINDER TO BLEEDER TUBE | *4 | CLUTCH RELEASE WITH BEARING CYLINDER ASSEMBLY |
| *5 | ENGINE MOUNTING BRACKET LH | *6 | FRONT ENGINE MOUNTING BRACKET |
| *7 | MANUAL TRANSAXLE ASSEMBLY | *8 | REAR ENGINE MOUNTING BRACKET |
| *9 | STARTER ASSEMBLY | *10 | WIRE HARNESS CLAMP BRACKET |
| *11 | CLUTCH TUBE BOOT | *12 | BLEEDER TO ACCUMULATOR TUBE |
| *13 | ACCUMULATOR TO FLEXIBLE HOSE TUBE | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Clutch spline grease |  |
Adhesive 1324 |
| ★ | Precoated part | - | - |
| *T1 | for Flange Bolt: 37 (377, 27) for Bolt with Washer: 33 (337, 24) |
*T2 | Bolt Length 25 mm (0.984 in.): 45 (459, 33) Bolt Length 22 mm (0.866 in.): 64 (653, 47) |