СИСТЕМА КРУИЗ-КОНТРОЛЯ (для моделей с 8NR-FTS) ДОРОЖНОЕ ИСПЫТАНИЕ


  1. PROBLEM SYMPTOM CONFIRMATION


    1. A01LZ14C03
      *a ON-OFF
      *b -/SET

      Inspect the SET function.


      1. Turn the cruise control system on using the cruise control main switch (ON-OFF button).

      2. Check that the cruise control indicator illuminates (green) in the combination meter assembly.

      3. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      4. Push the cruise control main switch to -/SET.

      5. A01LWHZC22
        *a Cruise Control Indicator (Green)
        *b Cruise Control SET Indicator

        Check that the cruise control SET indicator illuminates at this time.

      6. After releasing the switch, check that the vehicle maintains the set speed.

    2. A01M3A7C02
      *a ON-OFF
      *b +/RES

      Inspect the + (ACCEL) function.


      1. Turn the cruise control system on using the cruise control main switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control main switch to -/SET.

      4. Check that vehicle speed increases while the cruise control main switch is pushed to +/RES, and that the vehicle maintains the newly set speed when the switch is released.

      5. Push the cruise control main switch to +/RES and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (tap-up control).

    3. A01LZ14C04
      *a ON-OFF
      *b -/SET

      Inspect the - (COAST) function.


      1. Turn the cruise control system on using the cruise control main switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control main switch to -/SET.

      4. Check that vehicle speed decreases while the cruise control main switch is pushed to -/SET, and the vehicle maintains the newly set speed when the switch is released.

      5. Push the cruise control main switch to -/SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (tap-down control).

    4. A01LZK1C02
      *a ON-OFF
      *b CANCEL

      Inspect the CANCEL function.


      1. Turn the cruise control system on using the cruise control main switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control main switch to -/SET.

      4. When any of the following are performed, check that cruise control system control of vehicle speed is canceled and that the normal driving mode (no control of vehicle speed by the cruise control system) resumes.


        • Depressing the brake pedal.

        • for Manual Transaxle:

          Depressing the clutch pedal.

        • for CVT:

          Moving the shift lever from D or M to any other position.

        • for CVT:

          Selecting the 3rd, 2nd or 1st range with the shift lever in M.

        • for CVT:

          Selecting the 3rd, 2nd or 1st range using the shift paddle switch with the shift lever in D or M (w/ Shift Paddle Switch).

        • Pulling the cruise control main switch to CANCEL.

        • Turning the cruise control system off using the cruise control main switch (ON-OFF button) (the stored vehicle speed in the ECM is not maintained).

    5. A01M3A7C03
      *a ON-OFF
      *b +/RES

      Inspect the RES (RESUME) function.


      1. Turn the cruise control system on using the cruise control main switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control main switch to -/SET.

      4. Cancel cruise control system control of vehicle speed by performing any of the above operations (other than turning the cruise control system off using the cruise control main switch (ON-OFF button)).

      5. After pushing the cruise control main switch to +/RES at a speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to cancellation.