ВЫКЛЮЧАТЕЛЬ ЗАЖИГАНИЯ (для моделей с кузовом типа "хэтчбэк", "универсал") УСТАНОВКА

PROCEDURE

1. Click here

   INSTALL ENGINE SWITCH (for RHD)

   
   

   1. Engage the 2 claws and install the engine switch.

2. Click here

   INSTALL NO. 2 SWITCH HOLE BASE (for RHD)

   Click here

3. Click here

   INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

   Click here

4. Click here

   INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for RHD)

   Click here

5. Click here

   INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

   Click here

6. Click here

   INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

   Click here

7. Click here

   INSTALL NO. 1 METER HOOD CLUSTER (for RHD)

   Click here

8. Click here

   INSTALL ENGINE SWITCH (for LHD)

   
   

   1. Engage the 2 claws to install the engine switch.

9. Click here

   INSTALL NO. 1 SWITCH HOLE BASE (for LHD)

   Click here

10. Click here

    INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

    Click here

11. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for LHD)

    Click here

12. Click here

    INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Click here

13. Click here

    INSTALL NO. 1 METER HOOD CLUSTER (for LHD)

    Click here

14. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here