КЛАПАН-ПЕРЕКЛЮЧАТЕЛЬ ДАВЛЕНИЯ МАСЛА УСТАНОВКА

PROCEDURE


  1. INSTALL OIL PRESSURE SWITCHING VALVE ASSEMBLY


    1. A00Y7S0C03
      *a O-ring

      Apply a light coat of engine oil to the O-ring of the oil pressure switching valve assembly.

    2. Install the oil pressure switching valve assembly with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

      Note

      Make sure that the O-ring is not torn or pinched when installing the oil pressure switching valve assembly.

    3. Connect the oil pressure switching valve assembly connector.

    4. Engage the wire harness clamp.

  2. ADD ENGINE OIL

    Click here

  3. INSPECT FOR OIL LEAK

    Click here

  4. CHECK ENGINE OIL LEVEL

    Click here

  5. INSTALL OIL FILTER ELEMENT SERVICE HOLE COVER

    Click here