ЭЛЕКТРОДВИГАТЕЛЬ ВЕНТИЛЯТОРА СИСТЕМЫ ОХЛАЖДЕНИЯ УСТАНОВКА

PROCEDURE

1. INSTALL COOLING FAN MOTOR

   
   

   1. Install the cooling fan motor with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

   2. Connect the cooling fan motor connector.

   3. Engage the 2 clamps.

2. INSTALL NO. 2 COOLING FAN MOTOR

   
   

   1. Install the No. 2 cooling fan motor with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

   2. Connect the No. 2 cooling fan motor connector.

   3. Engage the 2 clamps.

3. INSTALL FAN

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

4. INSTALL NO. 2 FAN

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the No. 2 fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

5. INSTALL RADIATOR ASSEMBLY

   Click here