ТЕРМОСТАТ (для блока цилиндров) СНЯТИЕ

PROCEDURE


  1. REMOVE TIMING CHAIN COVER ASSEMBLY

    Click here

  2. REMOVE WATER INLET


    1. A01M2WJ

      Remove the 3 bolts, water inlet and heater return gasket from the cylinder block sub-assembly.

  3. REMOVE THERMOSTAT (for Cylinder Block)


    1. A01LXNJ

      Remove the thermostat (for Cylinder Block) from the cylinder block sub-assembly.

    2. Remove the No. 1 water inlet housing gasket from the thermostat (for Cylinder Block).