ТЕРМОСТАТ СНЯТИЕ

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE GENERATOR ASSEMBLY

    Click here

  3. DISCONNECT NO. 2 RADIATOR HOSE

    Click here

  4. DISCONNECT NO. 3 WATER BY-PASS HOSE (for CVT)


    1. A01TA7J

      Slide the clip and disconnect the No. 3 water by-pass hose from the water inlet with thermostat sub-assembly.

  5. DISCONNECT NO. 4 WATER BY-PASS HOSE (for Manual Transaxle)


    1. A01TA7J

      Slide the clip and disconnect the No. 4 water by-pass hose from the water inlet with thermostat sub-assembly.

  6. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY


    1. A01T9EV

      Remove the 2 bolts and water inlet with thermostat sub-assembly.

  7. REMOVE NO. 2 WATER INLET HOUSING GASKET

    A01T8E9

    1. Remove the No. 2 water inlet housing gasket from the water inlet with thermostat sub-assembly.