ВЫПУСКНАЯ ТРУБА СНЯТИЕ

CAUTION / NOTICE / HINT

CAUTION:


  • Wear protective gloves and protective glasses when removing the exhaust pipe assembly.

  • The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

  • Confirm that the exhaust pipe assembly has cooled down before removing it.

PROCEDURE


  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. Remove the 2 bolts and 2 compression springs and disconnect the tail exhaust pipe assembly from the front exhaust pipe assembly.

      A01M0J5C01
      *A for Hatchback *B for Wagon

    2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

      Note

      Protect the rear bumper assembly using protection material such as a piece of cloth to avoid damage by the tail exhaust pipe baffle sub-assembly. (w/ Tail Pipe Baffle Sub-assembly)

    3. Remove the gasket from the front exhaust pipe assembly.

  2. REMOVE FRONT NO. 3 ENGINE UNDER COVER


    1. A01LZBN

      Remove the 4 clips and front No. 3 engine under cover from the vehicle body.

  3. REMOVE FRONT CENTER FLOOR BRACE SUB-ASSEMBLY


    1. A01LWZ2C01
      *A Type A
      *B Type B

      Remove the 4 bolts and front center floor brace sub-assembly from the vehicle body.

  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01M29V

      Remove the 2 bolts and 2 compression springs and disconnect the front exhaust pipe assembly from the exhaust manifold converter sub-assembly.

    2. Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.

    3. Remove the gasket from the exhaust manifold converter sub-assembly.

  5. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY (w/ Tail Exhaust Pipe Baffle)


    1. A01M23LC03
      *a Plastic Hammer

      Using a plastic hammer, remove the tail exhaust pipe baffle sub-assembly from the tail exhaust pipe assembly.