ДИФФЕРЕНЦИАЛЬНЫЙ ДАТЧИК ДАВЛЕНИЯ СНЯТИЕ

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE DIFFERENTIAL PRESSURE SENSOR


    1. A0030GLC01
      *a White-colored Lock
      *b Slide
      *c Push

      Slide the white-colored lock of the differential pressure sensor connector as shown in the illustration to release it and disconnect the differential pressure sensor connector.

    2. A00314P

      Using a T20 "TORX" socket wrench, remove the screw and differential pressure sensor.

    3. Disconnect the 2 No. 1 vacuum transmitting hoses.

    4. Remove the 2 No. 1 vacuum transmitting hoses from the differential pressure sensor.