КЛАПАН ПРОДУВКИ АДСОРБЕРА СНЯТИЕ

PROCEDURE


  1. REMOVE PURGE VALVE (PURGE VSV)


    1. A01LXOPC02
      *1 No. 1 Check Valve
      *2 No. 2 Fuel Vapor Feed Hose
      *3 No. 3 Fuel Vapor Feed Hose

      Slide the clip and disconnect the No. 3 fuel vapor feed hose from the No. 1 check valve.

    2. Disconnect the No. 2 fuel vapor feed hose from the No. 1 check valve.

    3. Remove the No. 1 check valve from the intake manifold.

    4. A01LVYZC02
      *1 Purge Valve (Purge VSV)
      *2 No. 2 Fuel Vapor Feed Hose
      *3 No. 1 Fuel Vapor Feed Hose

      Disconnect the purge valve (purge VSV) connector.

    5. Disengage the wire harness clamp from the purge valve (purge VSV).

    6. Remove the No. 2 fuel vapor feed hose from the purge valve (purge VSV).

    7. Disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).

    8. Remove the bolt and purge valve (purge VSV) from the intake manifold.