МОНОЛИТНЫЙ КАТАЛИТИЧЕСКИЙ НЕЙТРАЛИЗАТОР (для моделей с контроллером свечей накаливания) УЗЛЫ И ДЕТАЛИ

ILLUSTRATION

*1	DIFFERENTIAL PRESSURE SENSOR ASSEMBLY	*2	NO. 2 WIRING HARNESS HEAT INSULATOR
*3	NO. 1 VACUUM TRANSMITTING HOSE ASSEMBLY	*4	NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY
	N*m (kgf*cm, ft.*lbf): Specified torque	-	-

ILLUSTRATION

*1	EXHAUST GAS TEMPERATURE SENSOR	*2	WIRING HARNESS CLAMP BRACKET
	N*m (kgf*cm, ft.*lbf): Specified torque	*	For use with union nut wrench

ILLUSTRATION

*A	for LHD	*B	for RHD
*1	NO. 2 HOSE TO HOSE TUBE	*2	CHECK VALVE TO CONNECTOR TUBE HOSE
	N*m (kgf*cm, ft.*lbf): Specified torque	-	-

ILLUSTRATION

*1	AIR CLEANER CAP SUB-ASSEMBLY	*2	AIR CLEANER CASE SUB-ASSEMBLY
*3	BATTERY	*4	NO. 1 AIR TUBE
*5	OUTLET HEATER WATER HOSE A	*6	AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
*7	BATTERY CLAMP SUB-ASSEMBLY	*8	BATTERY CLAMP BOLT
*9	BATTERY TRAY	-	-
	N*m (kgf*cm, ft.*lbf): Specified torque	-	-

ILLUSTRATION

*1	SENSOR BRACKET	*2	NO. 1 TURBO INSULATOR
*3	NO. 5 MANIFOLD SUPPORT BRACKET	*4	NO. 2 VACUUM PIPE
	N*m (kgf*cm, ft.*lbf): Specified torque	*	For use with union nut wrench

ILLUSTRATION

*A	Type A	*B	Type B
*1	FRONT NO. 1 FLOOR HEAT INSULATOR	*2	FRONT EXHAUST PIPE ASSEMBLY
*3	FRONT CENTER FLOOR BRACE SUB-ASSEMBLY	*4	EXHAUST PIPE SUPPORT
*5	COMPRESSION SPRING	*6	GASKET
	N*m (kgf*cm, ft.*lbf): Specified torque	●	Non-reusable part

ILLUSTRATION

*1	NO. 4 MANIFOLD SUPPORT BRACKET	*2	DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY
*3	NO. 1 MANIFOLD SUPPORT BRACKET	*4	OUTLET TURBINE ELBOW GASKET
	N*m (kgf*cm, ft.*lbf): Specified torque	*	For use with offset wrench and hexagon socket wrench
●	Non-reusable part	-	-

ILLUSTRATION

*1	NO. 1 VACUUM PIPE	*2	NO. 2 EXHAUST GAS TEMPERATURE SENSOR
*3	NO. 2 EXHAUST MANIFOLD	-	-
	N*m (kgf*cm, ft.*lbf): Specified torque	*	For use with union nut wrench