КЛАПАН РОГ СНЯТИЕ

PROCEDURE

1. REMOVE EGR WITH COOLER PIPE ASSEMBLY

   Click here

2. REMOVE EGR VALVE (ELECTRIC EGR CONTROL VALVE ASSEMBLY)

   
   

   1. 

      Slide the clip and disconnect the No. 4 water by-pass hose from the EGR valve (electric EGR control valve assembly).

   2. Slide the clip and disconnect the No. 3 water by-pass hose from the EGR valve (electric EGR control valve assembly).

   3. Remove the 2 bolts and EGR valve (electric EGR control valve assembly).

   4. Remove the gasket from the intake air connector.