ПЕРЕПУСКНОЙ РАСПРЕДЕЛИТЕЛЬНЫЙ КЛАПАН РОГ УСТАНОВКА

PROCEDURE

1. INSTALL EGR BYPASS VALVE SWITCHING VALVE (NO. 1 VACUUM SWITCHING VALVE ASSEMBLY)

   
   

   1. Using a 4 mm hexagon socket wrench, install the EGR bypass valve switching valve (No. 1 vacuum switching valve assembly) with the 2 bolts.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   2. Connect the 2 vacuum hoses.

   3. Connect the EGR bypass valve switching valve (No. 1 vacuum switching valve assembly) connector.

2. INSTALL NO. 1 ENGINE COVER

   Click here

3. INSTALL OUTER COWL TOP PANEL

   Click here

4. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY

   Click here

5. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

6. INSTALL WATER GUARD PLATE LH

   Click here

7. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here