ОХЛАДИТЕЛЬ РОГ СНЯТИЕ

PROCEDURE


  1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 2 WATER BY-PASS HOSE

    A00Y6XH

    1. Slide the 2 clips and remove the No. 2 water by-pass hose.

  3. REMOVE EGR PIPE WITH COOLER SUB-ASSEMBLY


    1. A00Y9WR

      Disconnect the vacuum hose.

    2. A00YAZLC01
      A00Y51D Bolt
      A00YA05 Nut

      Remove the 6 bolts, 2 nuts and EGR pipe with cooler sub-assembly.

    3. Remove the 2 gaskets from the No. 1 EGR pipe sub-assembly and EGR pipe with cooler sub-assembly.

    4. A00Y99DC01
      *1 O-ring

      Remove the O-ring from the EGR pipe with cooler sub-assembly.

    5. A00Y6ZFC01
      A00Y51D Bolt
      A00YA05 Nut

      Remove the 2 bolts, 2 nuts and No. 1 EGR pipe sub-assembly.

    6. Remove the gasket from the No. 2 EGR valve assembly.

    7. A00Y5G0

      Remove the No. 2 EGR valve assembly and gasket from the EGR pipe with cooler sub-assembly.

  4. REMOVE STUD BOLT

    Tech Tips

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. A00YA38

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts from the EGR pipe with cooler sub-assembly.