ДАТЧИК УРОВНЯ ТОПЛИВА В СБОРЕ СНЯТИЕ

PROCEDURE


  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A003107C01
      A003094 Push
      A0030VP Pull up

      Disconnect the fuel sender gauge assembly connector.

    2. Disengage the clamp to disconnect the wire harness.

      Note

      Do not damage the wire harness.

    3. Push the claw (A) of the fuel sender gauge assembly, and then pull up the fuel sender gauge assembly to remove it.

      Note


      • Do not touch the resistance plate or contacts of the fuel sender gauge assembly.

      • Be careful not to bend the arm of the fuel sender gauge assembly.