ДАТЧИК ТЕМПЕРАТУРЫ ТОПЛИВА СНЯТИЕ

CAUTION / NOTICE / HINT

Note

When working on the fuel circuit, protect the generator assembly against contamination. Cover the generator assembly with suitable materials. Failure to comply with this procedure may result in a generator assembly malfunction.

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE FUEL TEMPERATURE SENSOR


    1. A0030H3

      Disconnect the fuel temperature sensor connector.

    2. Using a 17 mm (12-point) deep socket wrench, remove the fuel temperature sensor from the fuel feed line.

    3. Remove the O-ring from the fuel temperature sensor.