ЭЛЕКТРОННЫЙ БЛОК ПРИВОДА ФОРСУНОК УСТАНОВКА

PROCEDURE

1. INSTALL INJECTOR DRIVER

   
   

   1. Install the injector driver with the 4 screws to the injector driver bracket.

      Torque:

      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

   2. Install the injector driver with the clip and 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   3. Connect the 4 injector driver connectors and install the 2 clamps.