РАСПРЕДВАЛ УЗЛЫ И ДЕТАЛИ
ILLUSTRATION
| *1 | NO. 1 IGNITION COIL | *2 | WATER BY-PASS PIPE SUB-ASSEMBLY |
| *3 | ENGINE OIL LEVEL DIPSTICK GUIDE | *4 | VACUUM PUMP ASSEMBLY |
| *5 | FUEL VAPOR FEED PIPE | *6 | ENGINE OIL LEVEL DIPSTICK GUIDE O-RING |
| *7 | NO. 2 O-RING | *8 | NO. 3 O-RING |
| *9 | WATER INLET PIPE GASKET | *10 | WATER BY-PASS PIPE UNION BOLT |
| *11 | ENGINE OIL LEVEL DIPSTICK | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CYLINDER HEAD COVER SUB-ASSEMBLY | *2 | CYLINDER HEAD COVER GASKET |
| *3 | SPARK PLUG TUBE GASKET | *4 | FUEL PUMP ASSEMBLY |
| *5 | FUEL PUMP PROTECTOR | *6 | FUEL PUMP SPACER GASKET |
| *7 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side) | *8 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side) |
| *9 | CAMSHAFT TIMING OIL CONTROL SOLENOID O-RING | *10 | CYLINDER HEAD COVER SEAL WASHER |
| *11 | GASKET | *12 | O-RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Adhesive 1324 | ★ | Precoated part |
ILLUSTRATION
| *1 | TIMING CHAIN COVER ASSEMBLY | *2 | ENGINE MOUNTING BRACKET RH |
| *3 | CRANKSHAFT PULLEY | *4 | TIMING CHAIN COVER OIL SEAL |
| *5 | WATER INLET PIPE | *6 | WATER INLET O-RING |
| *7 | CRANKSHAFT PULLEY SET BOLT | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
MP grease |  |
Adhesive 1324 |
 |
Do not apply lubricants to the threaded parts | ★ | Precoated part |
ILLUSTRATION
| *1 | CHAIN SUB-ASSEMBLY | *2 | CHAIN TENSIONER SLIPPER |
| *3 | TIMING CHAIN GUIDE | *4 | NO. 1 CHAIN TENSIONER ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | CAMSHAFT HOUSING SUB-ASSEMBLY | *2 | CAMSHAFT TIMING GEAR ASSEMBLY |
| *3 | CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY | *4 | OIL CONTROL VALVE FILTER |
| *5 | CAMSHAFT | *6 | NO. 2 CAMSHAFT |
| *7 | CAMSHAFT BEARING CAP | *8 | CAMSHAFT TIMING GEAR BOLT (for Intake Side) |
| *9 | CAMSHAFT TIMING GEAR BOLT (for Exhaust Side) | *10 | WATER VALVE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
| *T1 | Type A: 120 N*m (1224 kgf*cm, 89 ft.*lbf) Type B: 95 N*m (969 kgf*cm, 70 ft.*lbf) |
- | - |