ГОЛОВКА БЛОКА ЦИЛИНДРОВ (для моделей без контроллера свечей накаливания) РАЗБОРКА

Click here Click here

PROCEDURE

1. Click here

   REMOVE VALVE STEM CAP

   
   

   1. Remove the 8 valve stem caps.

2. Click here

   REMOVE INTAKE VALVE

   
   
   1. 

      Using SST, remove the 2 valve spring retainer lock halves.

      09202-70020

      09202-00010

   2. Remove the valve spring retainer, outer compression spring and intake valve from the cylinder head sub-assembly.

3. Click here

   REMOVE EXHAUST VALVE

   
   
   1. 

      Using SST, remove the 2 valve spring retainer lock halves.

      09202-70020

      09202-00010

   2. Remove the valve spring retainer, outer compression spring and exhaust valve from the cylinder head sub-assembly.

4. Click here

   REMOVE VALVE STEM OIL SEAL

   
   
   1. 

      Using needle-nose pliers, remove the valve stem oil seal.

5. Click here

   REMOVE VALVE SPRING SEAT

   
   

   1. Remove the valve spring seat from the cylinder head sub-assembly.

6. Click here

   REMOVE VALVE ROCKER ARM PIVOT

   
   
   1. 

      Remove the valve rocker arm pivot from the cylinder head sub-assembly.

7. Click here

   REMOVE NO. 1 WITH HEAD TAPER SCREW PLUG

   
   
   1. 

      Using a 6 mm hexagon socket wrench, remove the No. 1 with head taper screw plug and gasket.