ДАТЧИК ТЕМПЕРАТУРЫ ОХЛАЖДАЮЩЕЙ ЖИДКОСТИ УСТАНОВКА

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Using a 17 mm (12-point) deep socket wrench, install the engine coolant temperature sensor.

      Torque:

      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

   2. Connect the engine coolant temperature sensor connector.

2. ADD ENGINE COOLANT

   Click here

3. INSPECT FOR COOLANT LEAK

   Click here

4. INSTALL NO. 1 ENGINE COVER

   Click here