ПОДОГРЕВАЕМЫЙ КИСЛОРОДНЫЙ ДАТЧИК СНЯТИЕ

PROCEDURE


  1. REMOVE FRONT NO. 3 ENGINE UNDER COVER (for Full Cover Type)


    1. Remove the 4 clips and front No. 3 engine under cover.

  2. REMOVE HEATED OXYGEN SENSOR


    1. A01M1H3C02
      *1 Wire Harness Clamp Bracket

      Disconnect the heated oxygen sensor connector.

    2. Disengage the 2 wire harness clamps.

    3. Remove the wire harness clamp bracket from the heated oxygen sensor.

    4. A01LZYWN01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      SST
      09224-00011

      Note

      If the heated oxygen sensor has been struck or dropped, replace it.