ЭЛЕКТРОМАГНИТНЫЙ ГИДРАВЛИЧЕСКИЙ КЛАПАН ИЗМЕНЕНИЯ ФАЗ СНЯТИЕ

PROCEDURE

1. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)

   
   

   1. 

      Disconnect the camshaft timing oil control solenoid assembly connector.

   2. Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

      Note

      If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

   3. 

      Remove the O-ring from the camshaft timing oil control solenoid assembly.

      Note

      
      

      • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

      • Do not drop the O-ring into the timing chain cover assembly.

2. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side)

   
   

   1. 

      Remove the bolt and separate the engine wire from the cylinder head cover sub-assembly.

   2. 

      Disconnect the camshaft timing oil control solenoid assembly connector.

   3. Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

      Note

      If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

   4. 

      Remove the O-ring from the camshaft timing oil control solenoid assembly.

      Note

      
      

      • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

      • Do not drop the O-ring into the timing chain cover assembly.