ДАТЧИК АБСОЛЮТНОГО ДАВЛЕНИЯ В КОЛЛЕКТОРЕ УСТАНОВКА

PROCEDURE

1. Click here

   INSTALL DIESEL TURBO PRESSURE SENSOR

   
   

   1. Install the diesel turbo pressure sensor with the bolt.

      9.0 N*m

      92 kgf*cm

      80 in.*lbf

      Note:

      If a component has been dropped or subjected to a strong impact, replace it.

      Note:
      

      • Make sure that the protrusion of the gas filter bracket is inserted into the hole of the sensor.

      • If a component has been dropped or subjected to a strong impact, replace it.

   2. Connect the vacuum hose to the diesel turbo pressure sensor.

   3. Connect the pressure diesel turbo pressure sensor.

2. Click here

   CONNECT ENGINE WIRE

   
   

   1. Connect the engine wire with the bolt.

      8.4 N*m

      86 kgf*cm

      74 in.*lbf

3. Click here

   INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

   Click here