ДАТЧИК СОСТАВА ТОПЛИВОВОЗДУШНОЙ СМЕСИ (для моделей с контроллером свечей накаливания) ПРОВЕРКА

PROCEDURE


  1. INSPECT AIR FUEL RATIO SENSOR


    1. A01M0UUC07
      *A for Sensor 1
      *B for Sensor 2
      *a

      Component without harness connected

      (Air Fuel Ratio Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      5 (HAF1) - 2 (+B)

      5 (HAF2) - 2 (+B)

      		 20°C (68°F) 2 to 5 Ω

      5 (HAF1) - 4 (AF1+)

      5 (HAF2) - 4 (AF2+)

      		 Always 10 kΩ or higher

      If the result is not as specified, replace the air fuel ratio sensor.