ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА СНЯТИЕ

PROCEDURE


  1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click here

  2. REMOVE MANIFOLD SUPPORT BRACKET

    Click here

  3. REMOVE CYLINDER BLOCK SIDE COVER

    Click here

  4. REMOVE MANIFOLD STAY


    1. A012FCB

      Remove the 2 bolts and manifold stay.

  5. REMOVE CRANK POSITION SENSOR


    1. A012LGP

      Disconnect the connector from the crank position sensor.

    2. Disengage the crank position sensor connector wire harness clamp from the wire harness bracket.

    3. Remove the 2 bolts and the crank position sensor.