ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ УСТАНОВКА

PROCEDURE


  1. INSTALL INLET AIR TEMPERATURE SENSOR


    1. Install a new gasket to the intake air temperature sensor.

    2. A012IIJC01
      *a 22 mm ball joint lock nut wrench

      Using a 22 mm ball joint lock nut wrench, install the inlet air temperature sensor.

      Torque:
      34.3 N*m  { 350 kgf*cm, 25 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench.

      Click here

    3. Connect the connector from the inlet air temperature sensor.

  2. INSTALL NO. 1 ENGINE UNDER COVER