ECM УСТАНОВКА

PROCEDURE

1. Click here

   INSTALL NO. 2 ECM BRACKET

   
   

   1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

2. Click here

   INSTALL NO. 1 ECM BRACKET

   
   

   1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

3. Click here

   INSTALL ECM

   
   

   1. Install the ECM with the 2 bolts.

      12.5 N*m

      127 kgf*cm

      9 ft.*lbf

   2. 

      Connect the 2 ECM connectors and lower the 2 levers.

      Note:
      

      • When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.

      • Make sure that the 2 levers are securely lowered.

4. Click here

   INSTALL NO. 1 AIR CLEANER INLET

   
   

   1. Install the No. 1 air cleaner inlet with the bolt.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

5. Click here

   INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

6. Click here

   INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

7. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

8. Click here

   INSTALL NO. 1 ENGINE COVER

   Click here

9. Click here

   PERFORM REGISTRATION

   Click here

10. Click here

    PERFORM INITIALIZATION

    Click here