ROOF SUNSHADE INSTALLATION

PROCEDURE

1. INSTALL SLIDING ROOF HOUSING ASSEMBLY

   
   

   1. Install the sliding roof housing assembly with the 4 bolts and 6 nuts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Engage the 3 clamps.

2. INSTALL REAR NO. 2 SIDE RAIL SPACER LH

   
   

   1. Engage the 2 claws to install the rear No. 2 side rail spacer LH.

3. INSTALL REAR NO. 2 SIDE RAIL SPACER RH

   Tech Tips

   Use the same procedure as for the LH side.

4. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH

   Click here

5. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

6. RESET SLIDING ROOF DRIVE GEAR ASSEMBLY

   Click here

7. CHECK ROOF SUNSHADE SYSTEM

   Click here