ROOF SUNSHADE DISASSEMBLY

PROCEDURE


  1. REMOVE CONNECTOR WIRE


    1. A00YOL4

      Disengage the 4 clamps.

    2. Disconnect the connector to remove the connector wire.

  2. REMOVE NO. 1 DOME LIGHT BRACKET


    1. A00YPNVC02
      *1 Pin
      *2 Guide

      Remove the bolt.

    2. Disengage the pin and guide to remove the No. 1 dome light bracket.

  3. REMOVE SLIDING ROOF DRIVE GEAR ASSEMBLY


    1. A00YNA0

      Remove the bolt and the sliding roof drive gear assembly from the sliding roof housing sub-assembly.