ROOF HEADLINING(for Hatchback) REMOVAL

PROCEDURE


  1. REMOVE BATTERY BOX COVER


    1. A003296N01

      Pull the battery box cover in the direction indicated by the arrow (1) in the illustration to disengage the 2 guides.

    2. Pull the upper part of the battery box cover in the direction indicated by the arrow (2) in the illustration to remove it.

  2. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)


    1. Remove the deck board assembly.

  3. REMOVE REAR FLOOR MAT ASSEMBLY


    1. Remove the rear floor mat assembly.

  4. REMOVE REAR DECK FLOOR BOX (w/ Deck Floor Box)


    1. A0031ZZ

      Disengage the guide to remove the rear deck floor box.

  5. REMOVE DECK FLOOR BOX LH (w/ Deck Floor Box)


    1. A00323S

      w/o Woofer:


      1. Remove the 2 nuts.

      2. Disengage the claw to remove the deck floor box LH.

    2. A0031XS

      w/ Woofer:


      1. Remove the nut.

      2. Disengage the claw to remove the deck floor box LH.

  6. REMOVE DECK FLOOR BOX RH (w/ Deck Floor Box)


    1. A0031ZR

      Remove the 2 nuts and deck floor box RH.

  7. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)


    1. Remove the package tray trim panel assembly.

  8. REMOVE REAR DECK TRIM COVER


    1. A00328L

      for Clip Type:


      1. Turn the 2 clips as shown in the illustration to remove them.

    2. A003254

      for Hook Type:


      1. Remove the 2 bolts.

      2. Disengage the 2 guides to remove the 2 luggage hold belt striker assemblies.

    3. A00320D

      w/o Deck Board:


      1. Disengage the 4 claws, 4 clips and 2 guides to remove the rear deck trim cover.

    4. A00322D

      w/ Deck Board:


      1. Disengage the 4 claws, 4 clips and 4 guides to remove the rear deck trim cover.

  9. REMOVE REAR SEAT ASSEMBLY

    Click here

  10. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A003201

      Disengage the 10 claws to remove the front door scuff plate LH.

  11. REMOVE COWL SIDE TRIM BOARD LH


    1. A0031ZG

      Remove the clip.

    2. Disengage the claw and clip to remove the cowl side trim board LH.

  12. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. Remove the front door opening trim weatherstrip LH.

  13. REMOVE FRONT PILLAR GARNISH LH


    1. A0031ZYC01
      *a Front Pillar Garnish Clip

      Pull the upper part of the front pillar garnish LH toward the inside of the cabin and disengage the front pillar garnish LH from the base of the 2 clips.

      Tech Tips

      Let the front pillar garnish LH hang from the front pillar garnish clip.

    2. A0032A5C01
      *a Protective Tape
      *b 90°

      Using needle-nose pliers with the tips wrapped with protective tape, rotate the front pillar garnish clip 90° in the direction indicated by the arrow (1) shown in the illustration.

    3. Pull the front pillar garnish LH in the direction indicated by the arrow (2) shown in the illustration to disengage it from the front pillar garnish clip.

      Note


      • A front pillar garnish clip is reusable if it is not removed from the vehicle and is not damaged.

      • Replace the front pillar garnish clip with a new one if it is removed from the vehicle.

    4. Pull the front pillar garnish LH in the direction indicated by the arrow (3) shown in the illustration to disengage the 3 guides and remove the front pillar garnish LH.

    5. A00323JC01
      *1 Curtain Shield Airbag Assembly LH
      *a Adhesive Tape
      *b Protective Cover

      Protect the curtain shield airbag assembly LH.


      1. Cover the curtain shield airbag assembly LH with a piece of cloth or nylon and secure the edges of the cover with tape as shown in the illustration.

        Note

        Cover the curtain shield airbag assembly LH with a protective cover as soon as the front pillar garnish is removed.

  14. REMOVE REAR DOOR SCUFF PLATE LH


    1. A00325Q

      Disengage the 8 claws to remove the rear door scuff plate LH.

  15. REMOVE REAR UNDER SIDE COVER LH


    1. A00322S

      Using a clip remover, remove the 2 clips.

    2. Disengage the 2 claws and 2 clips to remove the rear under side cover LH.

  16. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Remove the rear door opening trim weatherstrip LH.

  17. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)

    Click here

  18. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

  19. REMOVE CENTER PILLAR LOWER GARNISH LH


    1. A0032AA

      Disengage the 2 claws, 3 clips and 2 guides to remove the center pillar lower garnish LH.

  20. REMOVE CENTER PILLAR GARNISH ASSEMBLY LH


    1. A0031YW

      Remove the 2 screws.

    2. Disengage the clip.

    3. Pass the floor anchor of the front seat outer belt assembly LH through the center pillar garnish assembly LH to remove it.

    4. Remove the clip from the center pillar garnish assembly LH.

  21. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  22. REMOVE COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure as for the LH side.

  23. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure as for the LH side.

  24. REMOVE FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  25. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  26. REMOVE REAR UNDER SIDE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  27. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure as for the LH side.

  28. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  29. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  30. REMOVE CENTER PILLAR LOWER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  31. REMOVE CENTER PILLAR GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  32. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH


    1. A0031ZN

      Loosen the bolt to remove the rear seatback hinge sub-assembly LH.

  33. REMOVE REAR SEAT SIDE GARNISH LH


    1. A00327F

      Disengage the 5 claws and 2 clips to remove the rear seat side garnish LH.

  34. REMOVE NO. 2 DECK SIDE TRIM HOOK (for LH Side)


    1. A0031ZH

      Remove the screw.

    2. Disengage the pin to remove the No. 2 deck side trim hook.

  35. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/ Deck Board)


    1. A00329A

      Disengage the guide to remove the lower deck trim side board LH.

  36. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. A003284C01
      *a Protective Tape

      for Clip Type:


      1. Using a clip remover, disengage the clip and guide to remove the deck trim service hole cover.

        Tech Tips

        Tape the clip remover tip before use.

    2. for Hook Type:


      1. A0031ZC

        Remove the bolt.

      2. Disengage the guide to remove the luggage hold belt striker assembly.

    3. A00327Z

      w/ Deck Board:


      1. Remove the clip.

      2. Disengage the 2 clips to remove the deck side trim box LH.

    4. Disengage the 3 claws, 4 clips and 2 guides to disconnect the deck trim side panel assembly LH.

      A00321D

    5. Disconnect the connector to remove the deck trim side panel assembly LH.

  37. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH


    1. Disengage the 6 clips to remove the roof side inner garnish assembly LH.

      A00321CN01

    2. Remove the clip (A) from the roof side inner garnish assembly LH.

  38. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  39. REMOVE REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  40. REMOVE NO. 2 DECK SIDE TRIM HOOK (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  41. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  42. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  43. REMOVE UPPER INSTRUMENT PANEL

    Click here

  44. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

    Click here

  45. REMOVE RAIN SENSOR COVER (w/ Rain Sensor)

    Click here

  46. REMOVE MAP LIGHT ASSEMBLY

    Click here

  47. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Slide Switch Type)

    Click here

  48. REMOVE ASSIST GRIP ASSEMBLY

    Tech Tips

    Use the same procedure to remove all assist grip assemblies.


    1. A003238C01
      *a Protective Tape

      Using a screwdriver, disengage the 2 claws to remove the assist grip cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the assist grip cover RH.

      Tech Tips

      Use the same procedure as for the LH side.

    3. A0031ZM

      Disengage the 2 clips to remove the assist grip.

    4. Remove the 2 clips from the vehicle body.

  49. REMOVE REAR ASSIST GRIP ASSEMBLY LH


    1. A00325SC01
      *a Protective Tape

      Using a screwdriver, disengage the 2 claws to remove the assist grip cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the assist grip cover RH.

      Tech Tips

      Use the same procedure as for the LH side.

    3. A00329M

      Disengage the 2 clips to remove the assist grip.

    4. Remove the 2 clips from the vehicle body.

  50. REMOVE REAR ASSIST GRIP ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  51. REMOVE VISOR ASSEMBLY LH


    1. A00322B

      for "TORX" Screw:


      1. Using a T25 "TORX" socket wrench, remove the 2 screws and visor assembly LH.

    2. except "TORX" Screw:


      1. Remove the 2 screws and visor assembly LH.

  52. REMOVE VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  53. REMOVE ROOF HEADLINING ASSEMBLY (for Standard Roof)


    1. w/ EC Mirror:


      1. Disconnect the connector.

    2. w/ Rain Sensor:


      1. Disconnect the connector.

    3. A00326O

      for LHD Front Pillar LH Side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 6 clamps.

    4. A00320Q

      for RHD Front Pillar LH Side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 5 clamps.

    5. A0031Z4

      for Front Pillar RH Side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 3 clamps.

    6. A003261

      for Rear Pillar RH Side:


      1. Remove the bolt.

      2. Disengage the guide to disconnect the connector bracket.

      3. Disconnect the connector.

    7. A00327YC02
      *a 45°

      Turn the visor holder approximately 45° and pull it out as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. Disengage the 2 claws to remove the visor holder.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    9. w/o Vanity Light:

      A00325Y

      1. Using a clip remover, remove the 3 clips.

      2. Disengage the 2 guides.

    10. w/ Vanity Light:

      A00321G

      1. Using a clip remover, remove the 5 clips.

      2. Disengage the 2 guides.

    11. A00326G

      Remove the roof headlining assembly from the vehicle through the back door as shown in the illustration.

      Note

      Do not damage the roof headlining assembly or vehicle interior.

  54. REMOVE ROOF HEADLINING ASSEMBLY (for Glass Roof)


    1. w/ EC Mirror:


      1. Disconnect the connector.

    2. w/ Rain Sensor:


      1. Disconnect the connector.

    3. A00326O

      for LHD Front Pillar LH Side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 6 clamps.

    4. A00320Q

      for RHD Front Pillar LH Side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 5 clamps.

    5. A0031Z4

      for Front Pillar RH Side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 3 clamps.

    6. A00329L

      for Rear Pillar LH Side:


      1. Disconnect the connector.

    7. A003261

      for Rear Pillar RH Side:


      1. Remove the bolt.

      2. Disengage the guide to disconnect the connector bracket.

      3. Disconnect the connector.

    8. A00327YC02
      *a 45°

      Turn the visor holder approximately 45° and pull it out as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    9. Disengage the 2 claws to remove the visor holder.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    10. Using a clip remover, remove the 3 clips.

      A00326IC01
      *a Guide (A) *b Guide (B)
      *c Fastener - -

    11. Disengage the 2 guides (A).

    12. Disengage the 14 fasteners.

      Tech Tips

      Disengage the fasteners from the rear side of the roof headlining assembly.

    13. Pull the roof headlining assembly toward the rear of the vehicle to disengage the guide (B).

    14. A003283

      Remove the roof headlining assembly from the vehicle through the back door as shown in the illustration.

      Note

      Do not damage the roof headlining assembly or vehicle interior.