UPPER INSTRUMENT PANEL REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH


    1. Install the No. 1 defroster nozzle garnish with the 8 screws <B>.

      A01KS6A

  2. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A01KSOI

      Engage the 5 claws to install the No. 1 side defroster nozzle.

  3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE

    Tech Tips

    Use the same procedure as for the No. 1 side defroster nozzle.

  4. INSTALL NO. 1 INSTRUMENT PANEL CUSHION


    1. Install a new No. 1 instrument panel cushion as shown in the illustration.

      A01KSYNC01
      *a Marking - -
      Standard Dimension
      Area Dimension
      A 0 to 10 mm (0 to 0.394 in.)

      Tech Tips

      Install the No. 1 instrument panel cushion so that it is within the standard dimensions shown in the illustration.

  5. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. A01KTXO

      Engage the 7 clamps to install the No. 2 instrument panel wire.

  6. INSTALL NO. 2 INSTRUMENT PANEL CUSHION


    1. Using hot-melt glue, install a new No. 2 instrument panel cushion.

      A01KTLTC01
      *a Marking *b Hot-melt Glue Application Location
      Standard Dimension
      Area Dimension
      A 30 mm (1.18 in.)
      B 25 mm (0.984 in.)

      Tech Tips

      Install the No. 2 instrument panel cushion so that it is within the markings shown in the illustration.

  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL RETAINER


    1. A01KSFK

      Install the instrument cluster finish panel retainer with the 4 screws <B>.

  8. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01KU4J

      Install the center instrument panel register assembly with the 7 screws <B>.

    2. A01KSTA

      Connect the connector.

  9. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

    Click here

  10. INSTALL COOLER (SOLAR SENSOR) THERMISTOR

    Click here

  11. INSTALL NO. 2 HEATER TO REGISTER DUCT


    1. A01KT7B

      Install the No. 2 heater to register duct with the 3 screws <B>.

  12. INSTALL NO. 1 HEATER TO REGISTER DUCT


    1. A01KRJO

      Install the No. 1 heater to register duct with the 4 screws <B>.

  13. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A01KT9R

      Engage the 6 guides as shown in the illustration.

    2. A01KRIT

      Install the defroster nozzle assembly with the 3 screws <B>.

  14. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    Click here