FRONT EVAPORATOR TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 COOLER THERMISTOR


    1. A01SFBVC02
      *a Secured Part
      *b Sensor Part

      Install the No. 1 cooler thermistor as shown in the illustration.

      Installation Position
      Mark Measurement
      A 34.3 mm (1.35 in.)
      B 20.9 mm (0.823 in.)
      C 50 mm (1.97 in.)

      Note


      • Be sure to insert the thermistor only once because reinserting it into the same position will not allow it to be firmly secured.

      • When reusing the evaporator, insert the thermistor one row next to the one that has been used previously (X in the illustration).

      • After inserting the thermistor, do not apply excessive force to the wire.

      • Directly insert the thermistor until the edge of the plastic case "a" comes into contact with the evaporator "b".

  2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

    Click here

  3. INSTALL COOLER EXPANSION VALVE

    Click here

  4. INSTALL AIR CONDITIONING RADIATOR ASSEMBLY

    Click here