CONDENSER REASSEMBLY

PROCEDURE

1. INSTALL COOLER DRYER

   
   

   1. 

      *a

      Modulator

      Using pliers, install a new cooler dryer onto the modulator.

   2. 

      Apply sufficient compressor oil to the O-ring and the fitting surface of a new cap.

      Compressor Oil
      ND-OIL 11 or equivalent

   3. 

      Using a 14 mm straight hexagon wrench, install the cap onto the modulator.

      Torque:

      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }

2. INSTALL NO. 1 COOLER CONDENSER CUSHION

   

   
   

   1. Install the 2 No. 1 cooler condenser cushions.