CONDENSER REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  3. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE NO. 1 INVERTER BRACKET

    Click here

  5. REMOVE RADIATOR SUPPORT LH

    Click here

  6. REMOVE RADIATOR SUPPORT RH

    Click here

  7. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

  8. REMOVE NO. 2 FAN SHROUD

    A01KRC3

    1. Disengage the 4 clamps and disconnect the No. 3 water by-pass hose from the No. 2 fan shroud.

    2. A01KTFO

      Remove the 2 bolts.

    3. Disengage the 2 claws and 2 guides, and remove the No. 2 fan shroud.

  9. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01KU0G

      Remove the bolt and disconnect the discharge hose sub-assembly from the condenser with receiver assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  10. DISCONNECT AIR CONDITIONER TUBE ASSEMBLY


    1. A01KTAY

      Remove the bolt and disconnect the air conditioner tube assembly from the condenser with receiver assembly.

    2. Remove the O-ring from the air conditioner tube assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  11. REMOVE CONDENSER WITH RECEIVER ASSEMBLY


    1. A01KTXV

      Remove the 4 bolts.

    2. A01KTQU

      Pull the radiator assembly as shown in the illustration.

    3. A01KSUR

      Disengage the 2 guides and remove the condenser with receiver assembly as shown in the illustration.

      Note

      Do not damage the condenser or radiator when removing the condenser with receiver assembly.