COOLER EXPANSION VALVE REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))

    Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))

    Click here

  3. DISCONNECT SUCTION PIPE SUB-ASSEMBLY (w/o Sub-cool Accelerator)

    Click here

  4. DISCONNECT AIR CONDITIONER TUBE ASSEMBLY (w/o Sub-cool Accelerator)

    Click here

  5. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (w/ Sub-cool Accelerator)

    Click here

  6. REMOVE COOLER EXPANSION VALVE


    1. A01SFGS

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    2. w/o Sub-cool Accelerator:


      1. A01SFK6C02
        *a Bolt for Suction Pipe Sub-assembly

        Temporarily install the bolt for the suction pipe sub-assembly halfway to the cooler expansion valve.

    3. w/ Sub-cool Accelerator:


      1. A01SFK6C02
        *a Bolt for Air Conditioner Tube and Accessory Assembly

        Temporarily install the bolt for the air conditioner tube and accessory assembly halfway to the cooler expansion valve.

    4. A01SFEI

      Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.

    5. A01SFIZC02
      *1 No. 1 Cooler Evaporator Sub-assembly

      Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.