REAR SEAT OUTER BELT ASSEMBLY(for Hatchback) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

  2. REMOVE REAR FLOOR MAT ASSEMBLY

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Deck Floor Box)

    Click here

  4. REMOVE DECK FLOOR BOX LH (w/ Deck Floor Box)

    Click here

  5. REMOVE DECK FLOOR BOX RH (w/ Deck Floor Box)

    Click here

  6. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here

  7. REMOVE REAR DECK TRIM COVER

    Click here

  8. REMOVE REAR SEAT ASSEMBLY

    Click here

  9. REMOVE REAR DOOR SCUFF PLATE

    Click here

  10. REMOVE REAR UNDER SIDE COVER

    Click here

  11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  12. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY

    Click here

  13. REMOVE REAR SEAT SIDE GARNISH

    Click here

  14. REMOVE NO. 2 DECK SIDE TRIM HOOK

    Click here

  15. REMOVE LOWER DECK TRIM SIDE BOARD (w/ Deck Board)

    Click here

  16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  17. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY


    1. A01KTF8

      Remove the bolt and disconnect the floor anchor of the rear seat 3 point type outer belt assembly.

    2. A01KSS0

      Remove the nut.

    3. Disengage the guide to remove the rear seat 3 point type outer belt assembly.