REAR SEAT INNER BELT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH


    1. Attach the rear seat inner with center belt assembly RH to the rear center seat outer belt assembly and install the washer.

    2. A00YN0AC01
      *a Protruding Part

      Install the rear seat inner with center belt assembly RH and rear center seat outer belt assembly as a set with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the rear seat inner with center belt assembly RH with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor parts of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.

    3. Connect the connector.

  2. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. A00YNTUC01
      *a Protruding Part

      Install the rear seat inner with center belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the rear seat inner with center belt assembly LH with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor parts of the rear seat inner with center belt assembly LH to overlap the protruding parts of the floor panel.

    2. Connect the connector.

  3. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here