REAR SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. A00Y5RQC02
      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear center seat belt not fastened Below 1 Ω
      1 - 2 Rear center seat belt fastened 10 kΩ or higher
      3 - 4 Rear LH seat belt not fastened Below 1 Ω
      3 - 4 Rear LH seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner with center belt assembly LH.

  2. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH


    1. A00YBCVC01
      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear RH seat belt not fastened Below 1 Ω
      1 - 2 Rear RH seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner with center belt assembly RH.